img(height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=2939831959404383&ev=PageView&noscript=1")

Understanding and complying with Approved Document B

Ryno has launched IGNO, a non-combustible range of decking, paving and roofing systems that aim to make Building Regulations compliance more straightforward

In association with
The Ryno IGNO non-combustible range includes decking and paving systems for balconies and terraces.
The Ryno IGNO non-combustible range includes decking and paving systems for balconies and terraces.

Since the ban on using combustible materials in residential buildings of 18 metres and higher, there have been many questions surrounding compliance. Ryno has launched IGNO in a bid to make it straightforward. 

Following the Grenfell Tower disaster in June 2017, section B4 of the Building Regulations - which focus on external fire spread - came under review, resulting in updates and changes to the guidance around combustible cladding and fire risk.

In April 2019, after further amendments, an updated Document B came into force. The amended regulations ban the use of combustible materials in the external walls and specified attachments (such as balconies) of new buildings of 18 metres or more - or where work is carried out on existing buildings of the same height. These restrictions apply to residential blocks of flats, care homes, sheltered housing, student accommodation, hospitals and boarding school dormitories.

The Ryno non-combustible aluminium decking system on a balcony and terrace at Peabody's Williamson Heights in Wembley, London.
The Ryno non-combustible aluminium decking system on a balcony and terrace at Peabody's Williamson Heights in Wembley, London.

The government further clarified its position in July 2019 by advising building control officers to also check the cladding on buildings under 18 metres. Where existing buildings of any height have balconies, it is incumbent on the building owner to understand what materials have been used and to assess and manage the associated risk of external fire spread. They urge building owners to remove combustible materials from balconies if they are found in order to comply with Requirement B4.

On 15 November 2019 a fire ripped through a student accommodation block in Bolton, apparently spreading via its external wall. The Bolton building was also below 18 metres in height, putting it outside the scope of the new ban on combustibles. This recent fire has left many questions unanswered, with fire safety bodies and some MPs pushing for a further review of building regulations.

In early 2020, housing secretary Robert Jenrick outlined plans to reduce the 18-metre threshold further, telling the House of Commons: 'We banned the use of combustible materials in the external walls of high-rise buildings in December 2018… and today (20 January) I am announcing a consultation on the ban, again going significantly further, including by lowering the 18-metre height threshold to at most 11 metres.'

He went on to argue that building safety needs to be proportionate to the building, drawing on the Bolton fire that took place in a building standing 17.6 to 17.8 metres high: just a few centimetres from the 18-metre threshold.

RynoAluTerrace: a non-combustible aluminium decking system for balconies and terraces.
RynoAluTerrace: a non-combustible aluminium decking system for balconies and terraces.

These amendments to the regulations have created a lot of uncertainty around the law and best practice. The industry has seen many substandard substitute balcony and cladding products popping up; shouting about fire-rating, but falling well short on technical characteristics, such as loading capacity.

To help customers meet Building Regulations and requirements under Regulation 38, Ryno has launched the IGNO range of non-combustible products, created following the same exhaustive design principles the company has always used.

IGNO is a mark of assurance on all Ryno non-combustible products for the construction sector. It signifies non-combustible innovation that goes beyond compliance to build in protection.

For more information and technical support, visit: rynogroup.co.uk

 

Contact:

01358 726000

sales@rynogroup.co.uk


 

Latest

Learn more about nurturing practice-client relationships and turning the short-term into the long-term

Learn more about nurturing practice-client relationships and turning the short-term into the long-term

How are the pressures and unpredictability of practice affecting the business model in architecture? Is the quest for the perfect design undermining project viability? As part of RIBA Horizons 2034, Tim Bailey of XSite reflects on the fiscal challenges ahead

Tim Bailey offers some radical alternatives to current ways of working

Scotland’s New Build Heat Standard sets the pace for zero carbon heating adoption in the UK, but what does it mean for designers and will plans for dedicated Passivhaus legislation leave the rest of us playing catch up? Stephen Cousins reports

What does Scotland’s New Build Heat Standard mean for designers and the rest of the UK?

Penn Y Common and the CAT WISE building are among Royal Society of Architects in Wales president Dan Benham’s top five Welsh buildings, which demonstrate the essential ingredients of social impact, sustainability, regeneration and home

Royal Society of Architects in Wales president on his five favourite buildings in Wales

Unknown Works’ Energy Revolution Gallery for the Science Museum encapsulates the subject matter employing low carbon construction and both reused and reusable materials

Sustainable design and build matches gallery’s energy message